While in Florida I installed a larger propane tank. Clamped a piece of angle to the tongue and used redi bolt to clamp the tank between two pieces of angle. I installed the tank one inch too far back and the tank rubbed the body. Auntie M put a sponge in there that made it from Missouri to Washington state.
Dad wrapped the copper tubbing around a small propane tank three times to make the coil you see, looks cool I think, thanks dad. I tried using a regulator, but my heater will not work with it, so it goes without.
An adapter is required to install the heater. By far the most expensive part of this modification (other than the tank), cause dad gave me the copper.
I left a connection in the galley so I could add a tee and hook my cook stove later.
del
Friday, May 16, 2008
Subscribe to:
Posts (Atom)