Here is the wall trimmed from the last post.














At the top of the wall goes a piece of oak that the hatch hinge mounts to. Once again I installed this piece, and then trimmed.












I cut out the rear half of the wall, traced it on to the other side, and installed it. Remember glue, staple, clamp, bend, staple, and clamp. Repeat on other side.












With the notes on measurements for the fender, I cut the bottom of the wall out so the fender could be reattached. Repeat on other side. I bought a spare at Wally World and according to Murphy, I had to test fit it. I then reinstalled the tires.